The 2026 Price Increase Playbook: How to Raise Repair Rates Without Losing the Customers You Want
ServiceMag Staff
Reporting and editorial coverage from the ServiceMag newsroom.

A net 31% of small business owners raised their average selling prices in August, and a net 28% said they plan to raise them again, according to NFIB's Small Business Economic Trends survey for that month. If you run a repair shop and you are not in that first group, you spent this year financing your customers' inflation out of your own margin. Raising repair rates is a bookkeeping necessity, not a market-timing decision. Shops that put it off tend to find the gap in December, in a P&L that shows more revenue and less money.
The cost data says the same thing from the other direction. The Federal Reserve's Small Business Credit Survey, built on 7,653 employer-firm responses collected in the fall of 2024, found 75% of firms naming rising costs of goods, services or wages as a financial challenge, and 56% reporting trouble paying operating expenses. Wages have not backed off either: the same NFIB reading showed a net 31% of owners raised compensation in August, with 35% carrying unfilled openings and 23% calling labor quality their single biggest problem.
Parts are where it bites hardest in this trade. A June 2026 presidential proclamation trimmed the Section 232 derivative duty on residential HVAC equipment and components to 15% through the end of 2027, which we covered when it landed. That is real relief on future landed cost, and it does nothing for the compressor already sitting on your shelf at last year's rate.
Why the Gap Opened in the First Place
HVACR Business has been arguing a version of this for years. In "Do Your Prices Need Revisions in the Coming Year?", published December 2023, Rodney Koop of The New Flat Rate made the case that a contractor should audit internal efficiency before reaching for the price sheet, and should raise ancillary services before touching core ones. That is sound advice, written for a cost environment we no longer have.
Efficiency gains available to a three-truck shop are real but bounded. Tighten routing, cut a callback, book one more job a day, and you might claw back a few points. None of that covers a multi-year increase in what you pay for a control board. You can fix dispatch and still lose money on the ticket.
The other reason the gap opened is that most small shops price by comparison. Somebody calls three competitors, learns the market diagnostic fee is $95, and sets theirs at $89 to win the call. Nobody in that chain has looked at a cost sheet, which is how an entire local market drifts below cost together, and often does.
Step One: Price an Hour Before You Price a Job
Wendell Bedell, writing in HVACR Business in April 2022 under the headline "Stop Underpricing HVACR Repair Tickets", put contractor net profit before taxes as low as 2.3%. His worked example carried about $36 an hour in truck and travel cost alone before a wrench turned.
A shop billing $1 million a year keeps roughly $23,000 of it. Lift prices 5% across the same job volume and, if costs hold flat, the extra $50,000 drops almost entirely to net. The shop's profit more than triples on a change the average customer never comments on. That arithmetic is ours, not Bedell's, and it holds only if volume doesn't move, which is exactly what the rest of this is about.
Every shop has to run its own version of the calculation. Add up every dollar that leaves the business in a year, divide by the billable hours you actually sold, and you have a floor. Most owners doing this the first time find their floor sits above the rate they charge on weekends. If you have not decided how you charge before you decide how much, our breakdown of flat rate versus time and materials is the better place to start.
Step Two: Fix the Parts Ladder
Bedell's markup schedule steps down as part cost rises: 5.0x on anything under $10, and 1.5x once a part passes $500, with four bands in between. Shops hear "5x" and flinch, and they shouldn't. A $6 run capacitor and a $600 inverter board cost about the same to source, stock, warranty, restock when wrong, and carry on the truck. A flat 40% markup starves you on the capacitor and makes you uncompetitive on the board. The tiers price the work that surrounds the part rather than the part itself.
The top band is where we'd push back. At 1.5x on a $700 sealed-system component, a single warranty return wipes out the margin on three of them. Shops doing a lot of high-cost part work should look at a flat handling fee stacked on a lower multiple instead.
Step Three: Stage the Increase Over a Quarter
Move one thing per month. The diagnostic or trip fee goes first, because it is the number customers hear on the phone and the easiest to explain in a sentence about fuel, insurance and the tech's time. Parts tiers come second, since almost no customer tracks your markup. Labor rates and after-hours premiums land last.
Staggered increases read as ordinary business, while a single 12% jump across everything on January 1 reads as a decision aimed at the customer.
Rewrite the phone script before the first increase, not after. Your CSR needs the price framed with what it buys, said in the same breath, every time: a licensed tech, a stocked van, a warranty on the repair. A price quoted apologetically invites a negotiation. Our 2026 rate benchmarks for Southern California exist partly so owners can hear how far off the market they are before they make the call.
Maintenance agreement members are the group to handle by hand. Read the actual contract language. If it promises a percentage off current rates, you are fine. If it froze a dollar figure, honor the term, then fix the renewal wording this month.
What to Watch After You Pull the Trigger
Watch booking rate, weekly, broken out by CSR. Revenue lags and lies for a good 60 days, so it will not tell you anything usable until the damage is already on the books.
A few points of decline in week one is normal and usually reverses as the script settles. If the drop is isolated to one CSR, it is a training issue; if it persists across the board, the increase likely overshot what your market or your reputation supports, and you can walk back a fee far more easily than three months of losses.
Jobber's Home Service Economic Report for the second quarter of 2026, drawn from more than 100,000 home and commercial service businesses, found that operators grew revenue mainly by pricing work more effectively rather than by taking on more jobs. Contracting revenue rose 6.4% year over year in June. Consumer confidence in the same report fell to 44.8 in May during a gas price spike and recovered to 49.5 in June, a swing that had more to do with the pump than with anything on a contractor's cost sheet.
That volatility argues for a calendar. Shops that reprice on a fixed schedule stop making the decision under pressure, and that steadiness is worth more than the points it earns them.
Sources
NFIB. (2026). "Small Business Economic Trends, August 2026." nfib.com (figures also reported by Haver Analytics)
Federal Reserve Banks. (2025). "2025 Report on Employer Firms: Small Business Credit Survey." fedsmallbusiness.org
Executive Office of the President. (2026). "Further Adjusting the Tariff Regimes for Imports of Aluminum, Steel, and Copper Into the United States." Federal Register, June 4, 2026. 91 FR 34085 (document 2026-11314)
Koop, R. (2023). "Do Your Prices Need Revisions in the Coming Year?" HVACR Business. hvacrbusiness.com
Bedell, W. (2022). "Stop Underpricing HVACR Repair Tickets." HVACR Business. hvacrbusiness.com
Jobber. (2026). "Home Service Economic Report, Q2 2026." PR Newswire release




